Step 2: And plug the other end of the cable into your corresponding interfaces on the TV. Go to the Output area on the back of DVD player and insert the cables according to the interface color. A/V Cables has three cords colored red, white and yellow. Step 1: The process to hook up a DVD player via A/V Cables is similar to Component Cables. Step 3: After connection, you can turn on both DVD player and TV to start watching. Step 2: Then insert the other ends of these cables to your TV and make sure to match their colors. If Output area just contains three interfaces colored green, blue and red, you have to plug the white and the second red cables into the audio output area. You should plug all these cords into the interfaces with the same color. And in the area labeled Output or Out on the back of your DVD player, there are five interfaces match the colors of cords. Step 1: Component Cables has five cords with different colors. Connect a DVD player with Component Cables

After insert a readable disc into you DVD player, you can start to enjoy it. Step 4: Then you can power on the DVD player and your TV. Step 3: Check again and make sure both the connections are secure. Step 2: Turn to your TV and plug the other end of the cable into the HDMI interface on you TV. The interface is usually titled HDMI or HDMI Out. Step 1: Insert one end of the cable into the HDIM interface on the DVD player. Hook up a DVD playerīefore connect DVD player to your TV or HDTV, make sure to power off both devices.

But do not stack them together, for they will heat up and damage each other.

Step 3: After grasped the right connection, you'd better use the original cable packaged with your DVD player.īefore hook up a DVD player to TV, you should place the two devices close enough. A/V Cables usually has three prongs and also use different colors to match the interfaces and cables. The transmission quality of component cables is less than HDMI.Ī/V Cables: it is the most common connection for DVD players. And the color is used to match the cord and the interfaces of TV and DVD player. And it could provide the best quality video possible.Ĭomponent Cables: it usually has a set of prongs with five different colors. Unlike other connections, HDMI only need one cord to transmit both audio and video. HDMI: it is the latest connection that integrates a thinner and longer USB cord. And you have to choose the appropriate cords depending on your TV. There are diverse interfaces on the back of DVD player corresponding to different connection methods. Power it on by press the Power button until a small light or a message shows up. Step 1: Connect your DVD player to the nearest power supply. Fortunately, the process to start up and set a DVD player is simple. If you want to hook up a DVD player, the first thing you need to do is setting it up.

Amazon dvd player for mac